장면을 섞는 동안 색상이 색상환을 따라 변하고 채도와 밝기가 함께 바뀌는 전환Hue travels along the color wheel while scenes mix, with saturation and brightness shifting together.
0.7초 동안 두 장면의 색상 각도가 색상환을 따라 보간되며 중간에는 채도가 오른 무지개 색조가 스친다
색상 회전이 360도를 넘어 눈이 어지럽거나, 사람 피부가 초록으로 물들어 불쾌하다
기본값은 클립에 쓴 값Defaults are the values used in the clip
| 항목PARAM | 기본DEFAULT | 범위RANGE | 메모NOTE |
|---|---|---|---|
| 전체 지속 | 0.7s | 0.5~1.0s | 선형 |
| 색상 이동 | 60deg | 30~120deg | hue-rotate |
| 채도 부스트 | +30% | 0~50% | 중간에서 최대 |
| 혼합 | linear | opacity 교차 |
tl.to('.a', { filter: 'hue-rotate(60deg) saturate(1.3)', opacity: 0, duration: 0.7, ease: 'none' }, 0)
.fromTo('.b', { filter: 'hue-rotate(-60deg) saturate(1.3)', opacity: 0 },
{ filter: 'hue-rotate(0deg) saturate(1)', opacity: 1, duration: 0.7, ease: 'none' }, 0);그대로 붙여 넣는다Paste as is
<대상A>에서 <대상B>로 HSV 디졸브 느낌의 전환을 만들어줘. A는 0.7초 동안 hue-rotate 0에서 60deg, saturate 1에서 1.3, opacity 1에서 0으로, B는 hue-rotate -60deg에서 0, saturate 1.3에서 1, opacity 0에서 1로 동시에 보간해. 이징 none, paused 타임라인 하나.
Build an HSV-style dissolve from <targetA> to <targetB>. A goes hue-rotate 0 to 60deg, saturate 1 to 1.3, opacity 1 to 0 over 0.7 seconds while B goes hue-rotate -60deg to 0, saturate 1.3 to 1, opacity 0 to 1 at the same time. Use ease none in one paused timeline.
<파일>에 HSV 스타일 dissolve를 넣어. .a filter hue-rotate(60deg) saturate(1.3)와 opacity 0, .b filter hue-rotate(-60deg) saturate(1.3)에서 0deg와 1로 opacity 1, 0.7s ease none. 0.35초에 두 장면이 반씩 섞이고 색조가 이동해 있는지, 0.7초에 B가 원색인지 캡처로 확인해.
Add an HSV-style dissolve to <file>. .a filter hue-rotate(60deg) saturate(1.3) and opacity 0; .b filter from hue-rotate(-60deg) saturate(1.3) to 0deg and 1 with opacity 1; 0.7s ease none. Capture at 0.35 seconds to confirm the scenes are half mixed with a shifted hue, and at 0.7 seconds to confirm B is in original color.
HyperFrames · ReelForge · Scrolline
개념 출처와 라이선스. 구현은 이 레포에서 새로 씀Concept sources and licenses. Implementations are original to this repo