분필로 글자가 그려진 뒤 지우개 띠가 지나가며 흐린 흔적을 남기는 칠판 효과Chalk letters are written, then an eraser band passes over leaving a faint smudge.
글자가 0.6초 동안 steps(4)의 거친 마스크로 쓰이고 1초 뒤 0.5초에 걸쳐 지우개 띠가 지나가며 불투명도 0.12의 흔적만 남는다
지우개가 글자를 한 번에 사라지게 하고 흔적이 없어 지웠다는 사실이 없다
기본값은 클립에 쓴 값Defaults are the values used in the clip
| 항목PARAM | 기본DEFAULT | 범위RANGE | 메모NOTE |
|---|---|---|---|
| 쓰기 | 0.6s | 0.4~1.0s | steps(4) 마스크 전진 |
| 정지 | 1.0s | 0.8~2.0s | 읽는 시간 |
| 지우기 | 0.5s | 0.4~0.8s | 띠 이동 |
| 잔흔 opacity | 0.12 | 0.08~0.15 | 분필 가루 |
tl.fromTo('.chalk', {clipPath:'inset(0 100% 0 0)'}, {clipPath:'inset(0 0% 0 0)', duration:0.6, ease:'steps(4)'}, 0.2)
.fromTo('.eraser', {x:-200}, {x:1200, duration:0.5, ease:'power1.inOut'}, 1.8)
.to('.chalk', {clipPath:'inset(0 0 0 100%)', duration:0.5, ease:'power1.inOut'}, 1.8)
.to('.ghost', {opacity:0.12, duration:0.2}, 1.9);그대로 붙여 넣는다Paste as is
<대상> 문구를 칠판 분필 효과로 만들어줘. 분필 글자는 clip-path가 0.6초 steps(4)로 왼쪽에서 오른쪽으로 쓰이고, 1초 정지 뒤 지우개 띠가 0.5초 동안 왼쪽에서 오른쪽으로 지나가며 글자를 지우되 불투명도 0.12의 잔흔을 남겨.
Make the phrase in <target> a chalkboard effect. The chalk text is written left to right by clip-path in 0.6s steps(4), held 1s, then an eraser band sweeps across in 0.5s erasing it and leaving a 0.12-opacity ghost.
<파일>에 analog medium text를 적용해. .chalk clipPath inset(0 100% 0 0)에서 inset(0)을 0.2초부터 0.6초 steps(4), .eraser x -200에서 1200을 1.8초부터 0.5초, .chalk 지우기 clipPath 동기, .ghost opacity 0.12. 0.5초·1.5초·2.0초·2.6초를 캡처해 쓰는 중, 완성, 지우는 중, 잔흔 상태를 확인해.
Apply analog medium text in <file>. .chalk clipPath inset(0 100% 0 0) to inset(0) from 0.2s over 0.6s steps(4); .eraser x -200 to 1200 from 1.8s over 0.5s; erase .chalk in sync; .ghost opacity 0.12. Capture at 0.5s, 1.5s, 2.0s and 2.6s: writing, complete, erasing, ghost.
HyperFrames · ReelForge · Scrolline
개념 출처와 라이선스. 구현은 이 레포에서 새로 씀Concept sources and licenses. Implementations are original to this repo
claude-skill:embedded-captions/CATALOG.md)unknown