좁은 대각 띠가 글자를 지나가고 띠 안에서만 RGB 어긋남이 보이는 효과A narrow diagonal band passes over the text, and RGB misalignment appears only inside it.
제목 위로 폭 15%의 대각 띠가 0.8초 동안 왼쪽에서 오른쪽으로 지나가고 띠 안에서만 R/B가 8px 갈라진다
띠 폭이 넓어 글자 전체가 계속 깨져 보이거나, 띠를 여러 번 반복해 산만해진다
기본값은 클립에 쓴 값Defaults are the values used in the clip
| 항목PARAM | 기본DEFAULT | 범위RANGE | 메모NOTE |
|---|---|---|---|
| 지속 | 800ms | 600~1200ms | 띠 통과 시간 |
| 띠 폭 | 15% | 8~25% | 글자 폭 기준 |
| 채널 변위 | 8px | 5~12px | 띠 안에서만 |
| 띠 각도 | 20도 | 10~30도 | 대각 |
| 밝기 | +0.15 | 0.1~0.25 | 띠 안 약간 밝게 |
/* .band를 clip-path 마스크로 쓰는 복사본 2장(R, B) */
tl.fromTo('.mask',{x:-320},{x:1920,duration:.8,ease:'power1.inOut'},t)
.set('.r',{x:-8},t).set('.b',{x:8},t)
.set('.r,.b',{x:0,opacity:0},t+.8);
// .mask는 skewX(-20deg) 폭 15% 띠, R/B 복사본은 이 마스크 안에서만 보임그대로 붙여 넣는다Paste as is
<제목>에 스캔 왜곡 띠를 넣어줘. 폭 15%, 20도 기울기의 띠를 0.8초 동안 왼쪽 밖에서 오른쪽 밖으로 power1.inOut으로 통과시키고, 띠 안에서만 빨강 복사본은 -8px, 파랑 복사본은 +8px 어긋나게 하고 밝기 +0.15. 띠 밖 글자는 그대로. 통과 후 복사본은 제거해. paused 타임라인으로 구동해.
Add a scan glitch band to <title>. Pass a band 15% wide at a 20-degree slant from off-screen left to off-screen right over 0.8s with power1.inOut. Only inside the band, shift the red copy -8px and the blue copy +8px and raise brightness by 0.15. Text outside stays untouched. Remove the copies afterward. Drive from a paused timeline.
<파일>의 <제목>에 glitch-scan-band를 구현해. 띠 폭 15%, 각도 20도, 통과 800ms power1.inOut, 채널 변위 8px. 0.2초, 0.4초, 0.6초, 1.0초를 캡처해 띠 안에서만 색 어긋남이 보이는지, 띠 밖 글자가 정상인지, 1.0초에 복사본이 없는지 확인해.
Implement glitch-scan-band on <title> in <file>: band width 15%, angle 20 degrees, pass 800ms power1.inOut, channel shift 8px. Capture at 0.2s, 0.4s, 0.6s, and 1.0s to verify color offset shows only inside the band, text outside is normal, and no copies remain at 1.0s.
HyperFrames · ReelForge · Scrolline
개념 출처와 라이선스. 구현은 이 레포에서 새로 씀Concept sources and licenses. Implementations are original to this repo