겹침 없이 바로 다음 화면으로 바꾸는 편집Switches straight to the next picture with no overlap.
장면 A가 3.0초에 끝나고 같은 프레임에 장면 B가 시작해 3초 동안 유지된다
연속 동작 중간을 잘라 튀는 컷이 되거나, 컷 뒤 화면 유지가 짧아 읽을 수 없다
기본값은 클립에 쓴 값Defaults are the values used in the clip
| 항목PARAM | 기본DEFAULT | 범위RANGE | 메모NOTE |
|---|---|---|---|
| 전환 길이 | 0ms | 0 | 겹침 없음 |
| 컷 뒤 유지 | 3.0s | 1.5~5s | 새 화면 읽는 시간 |
| 컷 간격 | 3.0s | 1.5~5s | 반복 시 일정하게 |
| 음악 정렬 | 비트 위 | 프레임 정확 | 컷은 비트에 맞춘다 |
tl.set('.sceneA', { autoAlpha: 0 }, 3.0)
.set('.sceneB', { autoAlpha: 1 }, 3.0);그대로 붙여 넣는다Paste as is
GSAP으로 <대상> 장면 A에서 B로 하드컷을 넣어줘. 3.0초 같은 프레임에 A를 autoAlpha 0, B를 autoAlpha 1로 tl.set하고 전환 효과는 넣지 마. 컷 뒤 B는 3초 이상 유지해. paused 타임라인에 넣어.
Add a hard cut from scene A to B in <target> with GSAP. At 3.0s use tl.set to set A to autoAlpha 0 and B to autoAlpha 1 in the same frame, with no transition. Hold B for at least 3 seconds. Paused timeline.
<파일>의 <대상>에 hard-cut을 적용해. tl.set(A, autoAlpha 0, 3.0)과 tl.set(B, autoAlpha 1, 3.0). 2.96초·3.0초·3.04초 프레임을 캡처해 A와 B가 동시에 보이는 프레임과 둘 다 비는 프레임이 0개인지 확인해.
Apply hard-cut to <target> in <file>. tl.set(A, autoAlpha 0, 3.0) and tl.set(B, autoAlpha 1, 3.0). Capture frames at 2.96s, 3.0s and 3.04s and check there are 0 frames where both are visible and 0 frames where both are empty.
HyperFrames · ReelForge · Scrolline
개념 출처와 라이선스. 구현은 이 레포에서 새로 씀Concept sources and licenses. Implementations are original to this repo