사건이나 발언 다음에 그것을 본 사람의 얼굴 또는 반응 화면으로 컷한다After an event or line, the view cuts to the face or reaction of someone who saw it.
발언이 끝나고 0.1초 뒤 0ms로 반응 화면으로 바뀌어 0.8초 유지된 후 다음 장면으로 이어진다
반응 화면이 발언 도중에 들어와 말이 끊기거나, 반응이 0.3초로 짧아 표정이 읽히지 않는다
기본값은 클립에 쓴 값Defaults are the values used in the clip
| 항목PARAM | 기본DEFAULT | 범위RANGE | 메모NOTE |
|---|---|---|---|
| 전환 길이 | 0ms | 고정 | 즉시 |
| 컷 지연 | 발언 종료 +0.1s | 0~0.2s | 문장 말미 |
| 반응 유지 | 800ms | 600~1200ms | 표정을 읽는 시간 |
| 반응 확대 | 1.05 서서히 1.0 | 1.0~1.08 | 유지 동안 아주 느리게 |
| 오디오 | 발언 여운 유지 | 반응 화면에서도 이어짐 |
tl.set('.speaker', { autoAlpha: 0 }, 2.1);
tl.set('.reaction', { autoAlpha: 1 }, 2.1);
tl.fromTo('.reaction', { scale: 1.05 }, { scale: 1, duration: 0.8, ease: 'none' }, 2.1);그대로 붙여 넣는다Paste as is
<대상> 영상에서 발언이 끝나는 2.0초 뒤 0.1초에 리액션 컷을 넣어줘. .speaker를 숨기고 .reaction을 표시하는 것은 tl.set으로 즉시 처리하고, .reaction은 scale 1.05에서 1로 0.8초 ease none. 반응 뒤에도 발언 오디오의 여운이 이어지게 해줘.
Add a Reaction Cut to <target> after the line ends at 2.0s. At 2.1s hide .speaker and show .reaction with tl.set, and let .reaction ease from scale 1.05 to 1 over 0.8s. Keep the tail of the speech audio playing over the reaction.
<파일>에 리액션 컷을 구현해. 2.1초에 .speaker 숨김, .reaction 표시(tl.set), .reaction scale 1.05에서 1로 0.8초 none. 2.0초, 2.15초, 2.6초, 3.0초 시점을 캡처해 2.0초는 발언자, 2.15초부터 반응 화면인지, 2.6초에 scale이 중간값인지 확인해.
Implement Reaction Cut in <file>. At 2.1s hide .speaker and show .reaction via tl.set; .reaction scale 1.05 to 1 over 0.8s ease none. Capture at 2.0s, 2.15s, 2.6s, and 3.0s to confirm the speaker at 2.0s, the reaction from 2.15s, and a mid-range scale at 2.6s.
HyperFrames · ReelForge · Scrolline
개념 출처와 라이선스. 구현은 이 레포에서 새로 씀Concept sources and licenses. Implementations are original to this repo